TL;DR
Get furniture and decor delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
A DIY shared by YouTube creator SheSoCraftDee uses two long, S-shaped garden hooks to support three small wooden trays in a tiered bathroom organizer. The project is presented as a way to store lightweight everyday items vertically, but the source does not report tested weight limits or long-term durability.
A YouTube creator known as SheSoCraftDee has demonstrated a bathroom organizer made from two long garden hooks and three small wooden trays, arranging the trays vertically to hold lightweight daily essentials. Hunker reported on the project as a compact storage idea for people looking to free up counter space, though the report does not provide independent testing of its strength or durability.
In the design, the garden hooks support the two sides of the organizer, while the trays form three shallow shelves. Their raised edges are intended to keep small items such as cotton balls, hair ties, flossers and cotton swabs from sliding off. The vertical arrangement uses less counter width than placing the same containers side by side.
The materials listed in the Hunker report include three Crafter’s Square wooden trays, two Garden Collection metal garden hooks, adhesive and jumbo craft sticks. Paint or stain is optional. The creator covers the trays’ handles with craft sticks, then finishes the wood if desired and allows it to dry before assembly.
For assembly, the trays are positioned at intervals along one hook, with room to reach into each one. The report says the creator applies E6000 adhesive and hot glue where the trays meet the hook, then places a second hook against the opposite ends. It recommends checking that the structure is level and using clamps while the adhesive cures. The finished piece should be stocked with lighter objects, with heavier items placed on the bottom tray, according to the report.
A Small-Footprint Storage Option
The project addresses a familiar household problem: toiletries and grooming supplies can crowd a bathroom counter, even when each item is small. A tiered organizer can make frequently used products visible and reachable without spreading them across the surface. That may suit renters or people with limited storage, provided they have room for the organizer and use it for items appropriate to its construction.
The approach also uses accessible craft materials rather than purpose-built shelving. The creator’s example can be adapted with paint, stain, stencils, decoupage or labels, according to Hunker. Those options make the design customizable, but they do not establish that the organizer will suit every bathroom or hold a particular amount of weight.
Products Worth Considering
Shark Clean & Empty Cordless Stick Vacuum with Auto-Empty System, BU3521
Shark IZ362H Cordless Anti-Allergen Stick Vacuum, Red
Shark Rocket Corded Stick Vacuum for Carpet and Hard Floors, Gray/Orange, HV301
As an affiliate, we earn on qualifying purchases.
How the Hook-and-Tray Design Works
Hunker’s report presents the project as a DIY idea from a YouTube video, not as a product launch or a tested storage system. Its central construction choice is to use two S-shaped garden hooks as side supports, with small wooden trays attached across them. The tray edges provide a boundary for loose items, while the spacing between levels is intended to keep the contents accessible.
The article also describes possible variations. The number of trays could be adjusted to fit the hooks, and the organizer could be decorated to match a room. For people who would rather keep the counter clear, Hunker mentions attaching the piece to a wall with brackets and screws or with Command X-Large Strips. The report does not provide installation instructions or verify the suitability of either method for a specific wall, surface or loaded organizer.
“The creator uses a combination of hot glue and E6000.”
— Hunker, reporting on SheSoCraftDee’s DIY
Weight Limits and Wall Mounting
The source does not state how much weight the assembled organizer can safely support, how long the adhesive needs to cure under particular conditions, or how it performs after repeated use in a humid bathroom. It also does not report whether the creator tested the structure with heavier products. The suggestion to keep heavy items low is guidance, not a documented capacity rating.
Wall mounting is mentioned as an option, but details such as wall material, fastener choice, strip capacity and the weight of the loaded organizer are not specified. Readers should not assume that a particular adhesive strip or mounting method will work for their surface or load without checking the product instructions.
Check Materials Before Building
There is no announced follow-up, product release or testing milestone in the source report. Anyone considering the project can first check that the hooks and trays fit together, decide how much clearance is needed between levels, and confirm that the chosen adhesive is appropriate for the materials. The assembly should be left undisturbed for the cure time stated by the adhesive manufacturer, rather than loaded immediately.
After the organizer is assembled, the practical next step is to use it only for lightweight essentials and watch for any movement at the joints. Anyone planning to mount it should follow the mounting product’s instructions and account for the wall surface and loaded weight. The Hunker report does not establish a verified safe load or offer a tested wall-installation method.
Key Questions
What materials does the bathroom organizer use?
The Hunker report lists two long metal garden hooks, three small wooden trays, jumbo craft sticks and adhesive. Paint or stain is optional.
What can be stored on the trays?
The design is intended for lightweight bathroom essentials, such as cotton balls, hair ties, flossers and cotton swabs. The report advises putting heavier items on the bottom tray but gives no tested weight limit.
How are the trays attached to the hooks?
Hunker says the creator uses a combination of E6000 and hot glue, attaches the trays to one hook, then lines up a second hook on the other side. Clamps can hold the pieces in place while the adhesive cures.
Can the organizer be mounted on a wall?
The report mentions brackets and screws or Command X-Large Strips as possible options, but does not give a tested installation method. Suitability depends on the wall, mounting product and total loaded weight.
Has the organizer’s durability been tested?
The source does not report independent testing, long-term use results or a safe load rating. It describes the creator’s method and recommends using the organizer for lightweight items.
Source: hunker.com
